Logistic Strap - 2" x 20' - Spring Fittings
Parts no. 642001
Logistic Strap, 2" x 20 feet
811 Ratchet Buckle, FE8306-1 Spring Fittings, 4900 Webbing
Working Load Limit: 1,000 lbs./455 kgs.
Ratchet Buckles Operating Instructions
To tension: Pull webbing through reel bars to eliminate slack. Operate handle back and forth until webbing is properly tensioned. Reel bars must have at least two wraps of webbing to ensure no slippage. Wrench drive models require the use of a socket or wrench.
To release: Pull handle pawl back and rotate handle over center to full open position.
WARNING: Webbing straps must be protected when used on rough or sharp objects. Straps that are cut, worn or damaged shall not be used and shall be replaced immediately. All strap assemblies shall be inspected prior to each use.
The use of “cheater bars” or other means of increasing leverage on a ratchet buckle handle or winch, other than a Kinedyne approved device, can cause serious injury to the user and/or bystanders.
WARNING: The use of cheater bars or other means of increasing the leverage on a ratchet buckle handle, other than a Kinedyne approved device, can cause serious injury to the user and/or bystanders.